外文翻譯---基于zigbee無線傳感器網絡的礦工的位置探測研究

1、<p>　　文 獻 翻 譯</p><p>　　二級學院 電子信息與自動化學院 </p><p>　　班 級 108070102 </p><p>　　學生姓名 學 號 10807010213 </p><p>　

2、　譯 文 要 求</p><p>　　1、譯文內容必須與課題（或?qū)I(yè)）內容相關，并需注明詳細出處。</p><p>　　2、外文翻譯譯文不少于2000字；外文參考資料閱讀量至少3篇（相當于10萬外文字符以上）。</p><p>　　3、譯文原文（或復印件）應附在譯文后備查。</p><p>　　譯 文 評 閱</p>

3、<p>　　導師評語（應根據學校“譯文要求”，對學生外文翻譯的準確性、翻譯數量以及譯文的文字表述情況等作具體的評價）</p><p>　　指導教師： </p><p>　　年 月 日 </p><p>　　基于ZigBee無線傳感器網絡的礦工的位置探測研究</p><p>　　張秀萍, 韓廣杰,

4、 朱昌平, 竇燕, 陶劍鋒</p><p>　　河海大學計算機與信息工程學院</p><p><b>　　中國常州</b></p><p>　　E-mail:zhangxiup@hhuc.edu.cn Zhucp315@126.com</p><p>　　摘要：隨著計算機的飛速發展，通信和網絡技術，特別是無線傳感器和嵌入

5、式技術的應用，使得無線傳感器網絡（WSNs）技術在產業領域和我們的日常生活得到了廣泛關注?；贏RM7TDMI-S CPU和ZigBee 的WSNs在提速和優化網絡移動節點的應用，豐富的信息采集中，以及在通信中實時時間的協調均有可取之處，具有低功耗連續作業特點，因此它是非常適合用于確定礦工在地下的位置。本文提出和分劃WSN的網絡計劃及信息處理與通信技術，重點專注于實時協作。通過傳感器準確獲得礦工的移動信息。之后的位置信息傳送可

6、靠的監控中心。不斷變化的運行測試結果表明沒有信息丟失或者沒有未被采集到的信息。因此，這個計劃是穩定和有效的，將在煤礦安全中發揮積極作用，在我看來這正是Zigbee無線傳感器網絡的正確特點。</p><p>　　關鍵詞：ZigBee的ARM7TDMI-S內核;  CC2420的; 無線傳感器網絡 ;礦工位置確定</p><p><b>　　簡介</b>

7、;</p><p>　　無線傳感器網絡（WSNs）是規模大，無線自組織網絡。它是整合計算機通信，網絡技術，嵌入式MCU和無線傳感器技術，具有感知和溝通能力?！?】節點有低低成本，小尺寸特點。其中大部分可以工作區域傳播，收集數據，并進行處理數據和通信。無線傳感器節點通常工作在無線電頻率（RF）頻段。節點構成一個分層架構現場監測數據的網絡。它通常適用在工業，農業，遠程醫療和環境監測。</p><

8、p>　　我們都知道，煤炭生產中的威脅復雜的工作條件，如有毒氣體，透水，塌陷，頂板等?！?】一旦發生事故發生時，它會危及礦工的生命。因此它是地面人員的當務之急，要明確礦工的確切位置，以便為及時采取措施。因此為礦工成立一個無線傳感器網絡監控礦井有很大的應用價值。</p><p><b>　　方案優選</b></p><p>　　礦工的位置監測系統主要技術規范要求歸納

9、如下：（1）定位精度為10米。煤礦巷道狹窄，彎曲復雜所以安全監控系統需要捕捉監測點。（2）低數據速率。發送數據的量要小，但必須具有高可靠性。（3）低功耗。事實上較大的電源在地下是不允許使用的（4）成本低監控系統設備?！?】</p><p>　　幾種無線傳輸模式的比較如表1所示。</p><p>　　ZigBee技術是復雜性低，低功耗，低數據速率，低成本，無線通信技術，它采用IEEE802

10、.15.4協議。它可以嵌入在設備中，具有地理位置的功能。它工作在數據傳輸速率為250 kbps。每個節點的范圍是通常在10?100米。范圍可高達有1?3公里通過增加RF發射功率。它可以迅速作出反應。從睡眠狀態只需15ms的工作狀態和30ms的訪問網絡。那定義了三個網絡拓?fù)浣Y(jié)構，包括星型拓?fù)浣Y(jié)構，集群拓?fù)浜途W(wǎng)狀拓?fù)浣Y(jié)構。節點多達65000，可以組織大容量數據傳輸網絡平臺。三級安全模式，使用靈活，以確定其安全屬性。免費的專利協議，免執照頻段

11、。 ZigBee的工作在2.4GHz ISM頻段，采用直接序列擴頻頻譜（DSSS）調制?！?】</p><p>　　表1無線傳輸方式的比較</p><p>　　考慮上述因素，與ZigBee的無線傳感器網絡技術能適應長期的礦工位置在低成本，低數據速率，低功耗的監控消費，可靠性高，所以這項計劃是通過在coalminer上的定位系統。在設計過程中，首先確定網絡結構，然后設備選擇和相關電

12、路設計，包括無線網絡，接收模塊采用MEGA128和CC2420，變電站模塊應用LPC2114等。最后是通信協議和相關軟件設計和調試。</p><p><b>　　無線傳感器網絡設計</b></p><p>　　系統功能：（1）實現井下礦工定位，及時卻定自己的位置以便在事故發生時，提高救援效率。（2）管理礦工進入或外出礦井的時間和頻率，得到了礦工的動態位置信息，從而提高

13、管理績效。（3）追溯歷史數據，統計和分析決策。</p><p>　　A 無線傳感器網絡結構和硬件設備的設計</p><p>　　我們的設計采用混合拓?fù)浣Y(jié)構。在目前比較大的電源不允許在礦井使用。星型拓?fù)浣Y(jié)構網絡是比較容易控制并同步與低功率消耗，因此它在第一層應用?？偩€(xiàn)拓?fù)浣Y(jié)構應用于第二層，因?yàn)椴ㄐ蝹鬏敂?shù)據在這種環境下有失真。</p><p>　　ZigBee無線傳感

14、器網絡設計礦工定位有四個部分：</p><p>　　1）監控和管理軟件平臺（主節點）：負責收集人員從網絡位置信息，追溯數據，統計和分析，并在顯示結果圖形的形式。</p><p>　　2）監視變電站：這是全功能負責接收信息的設備節點，從無線接收器和輸出的移動節點數據處理的主節點。</p><p>　　3）無線接收器（無線傳感器節點）：這是負責檢測信息礦工的工作區域內，

15、并把它發送到按照與通信的變電站協議。</p><p>　　4）無線代碼發射器：減少功能的設備節點，可以很容易地固定在礦燈盒，頭盔，腰帶，或放在口袋里。代碼發射器發出的射頻信號進行礦工“身份信息。當?shù)V工是在移動中工作區的無線接收器，他的信息將由接收機接收被轉移到變電站。【5】</p><p>　　系統結構如圖1所示。</p><p>　　在地面上的人員定位系統監控主機

16、組成，備份計算機，交換機，服務器，通信接口，避雷器及其他外圍設備。監控中心PC和相應的存儲和分析數據數據庫系統，然后可以得到每個礦工的立場在任何時候的信息。人員定位系統地下是無線傳感器網絡，它是變電站，無線接收器，代碼發射器組成，礦用隔爆型和本質安全電源等，這將完成收集和傳輸?shù)V工的位置，時間等信息。硬件設計人員定位系統地下將詳細介紹如下。</p><p><b>　　B.變電站設計</b>&

17、lt;/p><p>　　煤礦變電站是第一級子節點。每變電站的設計，加載6個無線接收器。它定期檢測指令發送到接收確定無線接收的信息是要在同一時間收到的，然后接收礦工的身份從無線接收的信息。變電站處理，存儲和顯示接收到的數據。</p><p>　　它會等待命令從主機電腦和發送在地面上的數據監控中心通過現場總線。通常有數百名礦工在一個煤礦，礦井隧道錯開在短短公里。所以11變電站的設計，它可以加載最多

18、66個無線接收器。</p><p>　　在這個方案中，LPC2114的CPU選擇變電站的設計【6】。 LPC2114是基于一個16/32-bit的ARM7TDMI-S CPU與實時仿真和嵌入式跟蹤支持，其緊湊的64引腳封裝，低功耗，多個32位定時器，4通道10位ADC，PWM通道和46個快速GPIO線多達9個外部中斷引腳。多個串行接口，包括兩個UART（16C550），快速I(mǎi)2C和兩個SPI。

19、隨著廣泛的串行通信接口，這是非常適合接收數據。</p><p><b>　　C.無線接收器設計</b></p><p>　　當?shù)V工與無線移動代碼發射通過一個無線接收器，代碼發射器礦工的身份證號碼的信息傳遞到無線接收器，然后開始分析信息。當檢測指令到達??時，它會按照數據發送到變電站建立協議。 Atmel的ATmega128的芯片公司用于微控制器，智能射頻Ch

20、ipcon公司的CC2420芯片ZigBee功能是用來作為無線收發器。ATmega128是一個低功耗的CMOS 8位增強的AVR RISC微控制器的基礎上結構。 CC2420是一個真正的單芯片2.4GHz的IEEE802.15.4標準的射頻收發器的低功耗設計與低電壓無線應用。它包括一個數字直接序列擴頻提供有效數據速率為250kbps。這是適合兩個全功能設備（FFD）和減少無線傳感器功能設備（RFD）網絡【7】。配置接口和CC

21、2420的發送/接收FIFO的訪問通過4線SPI接口（SI，SO，SCLK，CSN）。如上面提到的，很多優秀的功能使CC2420的和MEGA128特別適合我們的立場系統。 MEGA128和CC2420之間的接口如圖2所示。</p><p>　　無線接收器溝通與變電站通過RS485。數據傳輸波特率設置為1200bps。最大通信距離之間變電站和無線接收到5公里。</p><p>　　

22、75LBC184芯片采用的是電壓的接收器轉換之間以RS485和RS232UART的CPU引腳傳輸數據。當DE引腳75LBC184的高層次，轉遞是有效的，后，CPU的UART引腳傳輸數據的無線接收器。當/ RE的75LBC184針是低層次的，接受是有效的，那么CPU可以接收數據從RS485。如果接收機的地址符合檢測指令的地址，將接收器配置發送狀態和發回?cái)?shù)據塊變電站。</p><p>　　圖2 CC2420

23、的單片機接口</p><p><b>　　D.電源的設計</b></p><p>　　防爆和安全電源常用在可燃?xì)怏w和煤塵的危險環境。它采用雙重保護措施過電壓和過電流，三18DC電壓輸出，500?千毫安的電流輸出。它可以提供功率為1變電站和6接收器，在同一時間，緊湊的尺寸和重量輕。</p><p><b>　　E.無線代碼發射器<

24、/b></p><p>　　礦井代碼發射器傳輸識別獨立的數字代碼的時間間隔（每3秒）。代碼用于識別人員信息。代碼發射器組成的高頻發射（調制器），微控制器，電池和天線。</p><p>　　這使得利用ZigBee技術，2.4GHz的發射頻率，F(xiàn)SK調制，傳輸功率小于0 dBm時，電源電壓2.0?3.4V。它有兩種狀態：工作與睡眠。目前的工作是少小于1mA，休眠電流小于10，以

25、降低其耗電量。與微型封裝可固定在礦工鈥檚燈箱，頭盔，腰帶，或口袋里。如果車輛使用的，它應該被固定在非金屬零件上，以及盡可能高的安全地帶。</p><p>　　通信軟件設計變電站和無線接收器</p><p><b>　　時間調整</b></p><p>　　實時通信之間的合作節點是必需的，因此需要時間同步。</p><p>

26、;　　時間調整過程：系統啟動時，變電站將收到指令調整時間。然后將它發送到一號接收機。收到后從1號確認，然后將它發送到2號接收機，依此類推，直到最后一個。如果有不承認從一個接收器，變電站將等待一段時期時間，然后去到下一個。如果一個接收器沒有承認的3倍，它會被標示“故障”的和變電站液晶顯示。調整時間后，變電站檢測反過來接收機并收集礦工的身份識別信息。接收器發送數據塊到變電站，同時變電站傳輸接受信息以相應的接收器。只有接受信息被接收器成功接收

27、，變電站確認數據塊是否是有效的。</p><p><b>　　通信軟件設計</b></p><p>　　通信軟件的設計應考慮到以下三個因素：</p><p>　　1）無線接收器接收無線電信號代碼發射器，并分析成數字信號。微接收器控制單元（MCU），有4線SPILPC2114的CPU接口，具有2線SPI接口，所以數據通過SPI總線傳輸?shù)阶冸娬拘问?/p>

28、的外部中斷。</p><p>　　2）發送數字信號顯示電路。LPC2114器件支持I2C總線傳輸，所以可以傳輸數據，顯示驅動電路通過I2C總線。</p><p>　　3）包裝數據。如果監控中心發出定期檢測的指令，將數據傳輸?shù)阶冸娬尽?shí)時坐標是整個系統所必需的，使數據傳輸實時?？紤]代碼發射器傳輸數據之一時間每3秒，數據打包，每8秒鐘根據協議，在定時器中斷，使接收到的數據可以傳輸?shù)阶冸娬镜腃P

29、U時間。</p><p>　　基于上述分析，有4個中斷傳感器節點軟件</p><p><b>　　外部中斷數據傳輸。</b></p><p>　　數據顯示I2C中斷。</p><p><b>　　包的定時器中斷。</b></p><p>　　UART中斷接受定期檢測指令。&l

30、t;/p><p>　　變電站的CPU收到的數據塊需要有時間的數據，所以在變電站和接收時間應該是相同的。時間數據來自監測中心通過LPC2114的CPU MEGA128單片機。</p><p><b>　　數據包裝協議</b></p><p>　　變電站和接收器之間的數據封裝協議【8】設計的兩個方面。</p><p>

31、　　1）變電站發出了如下的說明。</p><p>　　a）調整指令?？蚣芙Y(jié)構：幀頭（5 FF）+接收號（1字節）+指令（23）號（1字節）+年+月（1字節）+日（1字節）+時間（1字節）+分鐘（1字節）+（1字節）+檢查（2個字節）。</p><p>　　b）定期檢測指令?？蚣芙Y(jié)構：幀頭（5 FF）+接收號（1字節）+指令第（20）+檢查（2個字節）。</p>

32、;<p>　　c）確認指令的信息。幀結構：幀頭（5 FF）+接收器號（1字節）+指令號（21）+檢查（2個字節）。</p><p>　　2）接收器發回如下說明</p><p>　　a）調整時間指令的識別。幀結構：幀頭（5 FF）+接收器號（1字節）+指令號（23）+檢查（2個字節）。</p><p>　　b）定期檢測指令的識別。幀結

33、構：幀頭（5 FF）+號接收器（1字節）+指令號（20）+天（1字節）+（1字節）+分鐘（1字節）+第二（1字節）+人數（1字節）+識別編號1（2字節）+ ...+識別碼數n（2字節）+檢查（2字節）。</p><p>　　c）信息識別確認指令。幀結構：幀頭（5 FF）+號接收器（1字節）+指令號（21）+檢查（2個字節）。</p><p><b>　　D.網

34、絡演習</b></p><p>　　在這個人員有11個變電站全球定位系統，可以最多裝入一個變電站6接收機。因此，網絡最多可以監測11x6xn礦工。隨著變電站和無線接收器之間的溝通，接收器可能隨機下降。一旦下降，將不再是檢測中斷接口。這種現象是長時間的溝通后發現，這是很難確定是所使用仿真工具的原因。</p><p>　　通過查找表和分析，可以發現故障原因。在時間序列故障如圖3所示

35、。</p><p><b>　　圖3故障的時間序列</b></p><p>　　由于程序的運行時間是不一樣的在不同的接收器，時間上分析通訊協議指令也不同。有人完成早一點，而其他一點點更高版本。例如，變電站發送出查詢?cè)赥1，接收指令0X01地址飾面分析T2指令。如果它的地址符合查詢條件，它開始響應時間t3，而0x04的完成接收分析指令T4。接收與回應0X01結束在T5。

36、在時間T3和T4，數據發送0X01不能接收0x04的。當結束的象征從0x01，它被認為是一個新的框架0x04的接收，然后再開始分析。有時候，它可以分析故障幀“成功”奇偶檢查，限制在這樣的方案，最終會導致混亂和下降。</p><p><b>　　圖狀態機流程圖</b></p><p>　　通過深入分析，發現有一些通訊程序的結構缺陷：發送緩沖區和接收緩沖區的份額同一個LP

37、C2114的CPU。雖然這種方法可以節省大量的RAM的單位，多接收器的情況下，會出現問題。為了改善它，隊列被用于串行緩沖器，因?yàn)橛凶銐虻腞AM單位LPC2114。發送緩沖區和接收緩沖區分隔。狀態機的方法是用來發送和接收數據，在這種方式，它可以解決兩個問題：頻繁通斷中斷處理和解碼錯</p><p>　　流程圖加入錯誤控制措施，如圖4所示。</p><p>　　這個狀態機的方法，很好地解決了問

38、題接收果醬。一個星期后，被測試，所有接收機工作正常，無堵塞發生。</p><p>　　另一個明顯的問題是變電站收到失真的波形。脈沖匹配電阻RS485的兩端，波形得到改善。它顯示在圖5。</p><p>　　大量的測試結果證明，數據從代碼發射器發射，可接收和檢測傳送到監控中心率達到100％，該系統是穩定的和有效的。</p><p><b>　　五、結論<

39、;/b></p><p>　　無線傳感器網絡將對21世紀的行業和我們的日常生活有很大的影響。這提出了基于ZigBee的WSN的項目技術，它是在煤礦行業中使用。WSNs的硬件和軟件設計詳細。系統測試證明該系統能正常工作可靠?；赯igBee人員定位系統在煤礦行業中具有很大的價值。這是一定會在煤礦安全生產中發揮積極作用。</p><p><b>　　圖5改進的波形</b&

40、gt;</p><p><b>　　六、參考文獻</b></p><p>　　[1]李小偉. 無線傳感器網絡技術. 北京理工大學出版社</p><p>　　[2]張修平. 礦井監控系統的研究葫蘆及其實現[J].工礦自動.feb.2007.78-79</p><p>　　[3] I.Akyildiz和E.Stunebeek

41、“地下無線傳感器網絡：研究面臨的挑戰“，特設網絡（ELSEVIER）2006年（4）. 669-686</p><p>　　[4] ZigBee聯盟的ZigBee規范[Z].版本1.0，http://www.ZigBee.org，2005-06-27</p><p>　　[5]李濱，田亞平. ZigBee無線傳感器中的應用網絡在工業領域的研究[J].山西科技大學。 oct.2008.110

42、-113</p><p>　　[6]周立功. ARM嵌入式系統基礎教程.北京航空航天大學出版社</p><p>　　[7]曲磊,劉晟德,胡賢斌. ZigBee技術和apllication. 北京航空航天大學航天大學出版社</p><p>　　[8]任秀麗,于海斌. 實現技術的研究ZigBee無線通信協議.計算機工程與應用. 2007,43（6）:143-145&

43、lt;/p><p>　　附（外文文獻原文）：</p><p>　　Research of Wireless Sensor Networks based on ZigBee for Miner Position</p><p>　　Xiuping Zhang, Guangjie Han, Changping Zhu, Yan Dou, Jianfeng Tao</p

44、><p>　　College of Computer & Information Engineering, Hohai Univ.</p><p>　　Changzhou, China</p><p>　　E-mail:zhangxiup@hhuc.edu.cn Zhucp315@126.com</p><p>　　Abstract—Wi

45、th the rapid development of computer communication and web technology, especially the widely application of wireless sensor and embedded technology, Wireless Sensor Networks (WSNs) have been paid great attention in indus

46、try field and our daily life. WSNs based on ARM7TDMI-S CPU and ZigBee device has merit of rapid and simple in networking, node movable in application, abundant information in acquisition, real time collaboration in commu

47、nication, low power consumption in continuous ope</p><p>　　Keywords- ZigBee; ARM7TDMI-S; CC2420; WSNs; Miner positionning</p><p>　　I. INTRODUCTION</p><p>　　Wireless Sensor Networks

48、(WSNs) is a large scale, wireless, self-organization network. It is integration of computer communication, web technology, embedded MCU and wireless sensor technology which has the ability to sense and communicate [1]. N

49、odes are of low cost, small size. Most of which can spread in the work region, collect data, process data and communicate. Wireless sensor nodes usually work at Radio Frequency (RF) band. Nodes constitute a tiered archit

50、ecture networks on site data monito</p><p>　　II. SCHEME SELECTION</p><p>　　Main technical specification requirements of miner position monitoring system are summarized as follows:(1) Position pr

51、ecision is 10 meters. Coal mine roadway is narrow, crooked and complicated, so safety monitoring system needs to capture more of the</p><p>　　monitoring points, (2) Low data rate. The amount of data to be tr

52、ansmitted is small, however high reliability of data transmission is required, (3) Low power consumption. Relatively large power supply is not allowed underground in fact, (4) Low cost of the</p><p>　　monito

53、ring system device is required [3].Comparison of several wireless transport modes is shown in Table 1.ZigBee technology is low protocol complexity, low power consumption, low data rate, low cost, wireless communication t

54、echnology, which adopts IEEE 802.15.4 protocol. It can be embedded in devices, and has the function of geography position. It works at the data rate of 250 kbps. The range of each node is normally between 10~100m. The ra

55、nge can be up to 1~3km by increasing the RF emission p</p><p>　　TABLE I. COMPARISION OF WIRELESS TRANSPORT MODES</p><p>　　Considered the above factors, WSNs with ZigBee technology can suit the l

56、ong-term coal miner position monitoring at low cost, low data rate, low power consumption, high reliability, so this scheme is adopted in coalminer position system. During the process of design, the network structure is

57、determined first, then device is selected and related circuit is designed for networking, including wireless receiver module applying Mega128 and CC2420, substation module applying LPC2114, etc.</p><p>　　Com

58、munication protocols and related software have been designed and debugged finally.</p><p>　　III. WIRELESS SENSOR NETWORKS DESIGN</p><p>　　System function: (1) Achieving underground miner positio

59、ning, having their location improve efficiency of rescue at the time of accident, (2) Managing the time and frequency that miner come into or go out of coalmine, getting miner’s dynamic position information, so as to im

60、prove management performance, (3) Tracing back historical data, statistics and analysis for decision-making.</p><p>　　A. WSNs structure and hardware device design </p><p>　　Mixed topology is imp

61、lemented in our design. At present relatively large power supply is not allowed in ine. Star topology network is relatively easy to control and synchronize with low power consume, therefore it is applied in the first lay

62、er. Bus topology is applied in the second layer, because data waveform transmitted has less distortion in this way. The ZigBee wireless sensor network designed for coal miner positioning has four sections:</p><

63、;p>　　1) Monitoring and managing software platform (master node): taking charge of collecting personnel position information from network, tracing back data, statistics and analysis, and displaying results in theform o

64、f graphic.</p><p>　　2) Monitoring substations: which are full function device nodes, responsible for receiving information of mobile nodes from wireless receiver and outputting data to the master node for pr

65、ocessing.</p><p>　　3) Wireless receivers (wireless sensor nodes): which are responsible for detecting information from miners’ within the working area and sending it to substation in accordance with communic

66、ation protocols.</p><p>　　4) Wireless code emitter: which are reduced function device nodes, which can be easily fixed in miner’s lamp box, helmet, belt, or pocket. Code emitter sends out radio frequency sig

67、nals which carry miners’identity information. When miner in mobile is in theworking area of wireless receiver, his information will be received by receiver and be transferred up to substation [5].</p><p>　　S

68、ystem structure is shown in Figure 1.</p><p>　　Fig.1 System Structure</p><p>　　Personnel positioning system on the ground is composed of monitoring host computer, backup computer, switch, server

69、, communication interface, arrester and other peripheral devices. Monitoring center stores and analyzes data by corresponding PC and database system, then can obtain each miner’s position information at any time. Personn

70、el positioning system underground is wireless sensor network, it is composed of substation, wireless receiver, code emitter, mine explosion-proof and intrinsically s</p><p>　　B. Substation design</p>

71、<p>　　Mine substation is the first level sub-node. Each substation is designed to load six wireless receivers. It sends periodic detection instructions to receivers to determine which wireless receiver’s information

72、 is to be received at one time, then receives miner’s identity information from the wireless receiver. Substation processes the received data for storing and displaying. It will wait for command from host computer and se

73、ndits data to monitoring center on the ground through field bus. Usuall</p><p>　　In this scheme LPC2114 CPU is selected for substation design [6]. The LPC2114 is based on a 16/32-bit ARM7TDMI-S CPU with real

74、-time emulation and embedded trace support, with their compact 64-pin package, low power consumption, various 32-bit timers, 4-channel 10-bit ADC, PWM channels and 46 fast GPIO lines with up to nine external interrupt pi

75、ns. Multiple serial interfaces including two UARTs</p><p>　　(16C550), fast I2C and two SPI. With a wide range of serial communication interfaces, which are very suitable for receive data.</p><p>

76、;　　C. Wireless receiver design</p><p>　　When miner with wireless code emitter in mobile pass through a wireless receiver, the code emitter would deliver miner’s information of ID number to the wireless recei

77、ver, then it begin to analyze the information. When detection instruction arrives, it willsend data to substation in accordance with the established protocol. ATmega128 chip of Atmel Corporation is used for the microcont

78、roller unit, and smart RF CC2420 chip of Chipcon Corporation with ZigBee function is used as the wireless transce</p><p>　　ATmega128 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC s

79、tructure. CC2420 is a true single-chip 2.4GHz IEEE 802.15.4 compliant RF transceiver designed for lowpower and low –voltage wireless applications. It includes a digital direct sequence spread spectrum providing an effect

80、ive data rate of 250kbps. It is suitable for both full function device (FFD) and reduced function device (RFD) in wireless sensor network [7]. The configuration interface andtransmit/receive FIFOs</p><p>　　F

81、ig.2 CC2420 to MCU Interface</p><p>　　D. Power Supply design</p><p>　　Explosion proof and intrinsically safe power supply is commonly used in dangerous environment with gas and coal dust. It use

82、s double protection measures for</p><p>　　over-voltage and over-current, three 18DC voltage output, 500~1000mA current output. It can supply power for 1 substation and 6 receivers at the same time, with comp

83、act size and light weight.</p><p>　　E. Wireless code emitter</p><p>　　Mine code emitter transmits independent identification digital code at intervals (every 3 seconds). The code is used to iden

84、tify personnel information. Code emitter is composed of high-frequency transmitter (modulator), microcontroller, batteries and antenna, It makes use of ZigBee technology, 2.4GHz transmit frequency, FSK modulation, transm

85、ission power less than 0 dBm, supply voltage 2.0~3.4V. It has</p><p>　　two types of state: work and sleep. Work current is less than 1mA, and sleep current is less than 10_A, so as to reduce its power consum

86、ption. With mini package it can be fixed in miner’s lamp box, helmet, belt, or pocket. If it is used for vehicles, it should be fixed on non-metallic parts, more safety place and as high aspossible.</p><p>　

87、　IV. COMMUNICATION SOFTWARE DESIGN FOR</p><p>　　SUBSTATION AND WIRELESS RECEIVER</p><p>　　A. Time tuning</p><p>　　Real time collaboration in communication between nodes is required,

88、 so time synchronization is needed. Time tuning process: when system is started, substations will receive the instruction of tuning time. Then send it to NO.1 receiver. After it receives acknowledge from NO.1, then send

89、it to No.2 receiver, and so on, until the last one. If there is no acknowledge from one receiver, substation will wait for a period of time, then go on to the next. If one receiver continues with no acknowledge fo</p&

90、gt;<p>　　After tuning time, substation detects receivers in turn and collects minersidentification information. Themeanwhile substation transmits acknowledge to corresponding receiver. Only after acknowledge from

91、the receiver is received successfully, substation can confirm whether the data block is effective.</p><p>　　B. Communication software design</p><p>　　Communication software design should take th

92、e following three factors into account.</p><p>　　1) Wireless receiver receives radio signal from code emitter, and analyzes it into digital signal. Micro Control Unit (MCU) in the Receiver has 4 wire SPI int

93、erface, LPC2114 CPU has 2 wire SPI interfaces, so data is transmitted to substation through SPI bus in the form of external interrupt.</p><p>　　2) Sending digital signal to display circuit. LPC2114 device su

94、pports I2C bus transmission, so data can be transmitted to display drive circuit</p><p>　　through I2C bus.</p><p>　　3) Packing data. If monitoring center sends out instruction of periodic detect

95、ion, it is transmitted to substations. Real time coordinate is required by the whole system, so data is required to be transmitted in real time. Considering code emitter transmits data one time every 3 seconds, data is p

96、ackaged every 8 seconds according to agreement during timer interrupt, so that the received data can be transmitted to substation</p><p>　　CPU in time. Based on analysis above, there are 4 interrupts in sens

97、or node software.</p><p>　　1) External interrupt for data transmission.</p><p>　　2) I2C interrupt for data display.</p><p>　　3) Timer interrupt for package.</p><p>　　4)

98、 UART interrupt for receiving periodic detection instruction.</p><p>　　Data block received by substation CPU need to have time data, so the time in substation and receiver should be the same. Time data comes

99、 from monitoring</p><p>　　center passed by LPC2114 CPU to Mega128 MCU.</p><p>　　C. Data packaging protocol</p><p>　　Data packaging protocols [8] between substation and receiver are

100、designed in two aspects.</p><p>　　1) Substation sends out instructions as follows.</p><p>　　a) Tuning time instruction. Frame structure: frame head (5 FF) + receiver No.(1 byte) + instruction No

101、.(23) + year(1 byte) + month(1 byte) + day(1 byte) + time(1 byte) + minute(1 byte) + second(1 byte) + check(2 byte).</p><p>　　b) Periodic detection instruction. Frame structure:</p><p>　　frame h

102、ead (5 FF) + receiver No.(1 byte) + instruction No.(20) + check(2 byte).</p><p>　　c) Information confirm instruction. Frame structure : frame head (5 FF) + receiver No.(1 byte) + instruction No.(21) + check(

103、2 byte).</p><p>　　2) Receiver sends back instructions as follows.</p><p>　　a) Recognition of tuning time instruction. Frame structure: frame head (5 FF) + receiver No.(1 byte) + instruction No.(

104、23) + check(2 byte).</p><p>　　b) Recognition of periodic detection instruction. frame structure : frame head(5 FF) + receiver No.(1byte) + instruction No.(20) + day(1 byte) + time(1 byte) + minute(1 byte) +