鈑金現場作業指導書

1、目錄前言前言1、目的、目的....................................................12、適用范圍、適用范圍................................................13、工藝審核、工藝審核................................................13.1工藝審核總則.........................

2、................13.2圖面規范性..........................................23.3尺寸和公差...........................................23.4裝配圖...............................................23.5鈑金加工工藝.....................................

3、...23.5.1鈑金加工基本流程及主要加工工藝....................23.5.2鈑金加工工序.....................................33.5.2.1沖裁與下料.....................................33.5.2.2折彎...........................................43.5.2.3拉伸與成型...........

4、..........................73.5.2.4壓鉚和漲鉚....................................103.5.2.5攻絲（直接攻絲）................................113.5.2.6螺釘過孔與沉孔................................123.5.2.7鈑金焊接...................................

5、...133.6開模件.............................................133.7表面處理............................................143.7.1幾種常見的表面處理...............................14圖面表達按照基礎部編寫的“PROE圖紙規范”和“技術制圖規范”執行。3.33.3尺寸和公差尺寸和公差1.重要尺寸應完整、正確

6、、清晰；2.尺寸基準選擇既要考慮設計要求、又要考慮加工定位和測量檢驗的要求；3.有裝配要求的兩個零件的配合尺寸應有公差要求；4.配合選擇應合理，優先選用基孔制，盡量選用優先配合和常用配合；5.公差等級選擇應適當；6.形位公差選擇應合理、適當；7.未注尺寸公差和未注形位公差的使用按信息平臺設計規范技術規“未注尺寸公差技術規范”和“未注形位公差技術規范”執行。3.43.4裝配圖裝配圖1.各零件組裝是否方便，安裝方法是否過于復雜，可否有更簡便