飛機裝配過程小直徑螺旋銑孔刀具研制及切削性能研究.pdf

1、 獨創性聲明 本人聲明所呈交的學位論文是本人在導師指導下進行的研究工作和取得的研究成果， 除了文中特別加以標注和致謝之處外， 論文中不包含其他人已經發表或撰寫過的研究成果， 也不包含為獲得 天津大學 天津大學 或其他教育機構的學位或證書而使用過的材料。 與我一同工作的同志對本研究所做的任何貢獻均已在論文中作了明確的說明并表示了謝意。 學位論文作者簽名：簽字日期：年 月 日 學位論文版權使用授權書 本學位論文作者完全了解 天

2、津大學 天津大學 有關保留、使用學位論文的規定。特授權 天津大學 天津大學 可以將學位論文的全部或部分內容編入有關數據庫進行檢索，并采用影印、縮印或掃描等復制手段保存、匯編以供查閱和借閱。同意學校向國家有關部門或機構送交論文的復印件和磁盤。 （保密的學位論文在解密后適用本授權說明） 學位論文作者簽名： 導師簽名： 簽字日期：年 月 日 簽字日期：年 月 日 II A

3、bstract In the process of machining small diameter hole of the titanium / CFRP, the chip space is small, the heat dissipation condition is poor, and the length diameter ratio of the tool is larger. Therefore, it is neces

4、sary to study the cutting tools and the machining process of the small diameter of the stacks, a special cutting tool is designed, which is based on the small diameter helical milling of the stacks: Based on the principl

5、e of helical milling cutter, the three-dimensional parametric model of helical milling cutter is established by using CREO software and optimized by ABAQUS finite element software. Combined with the machining characteris

6、tics of the stacks, the optimum cutting tool geometry structure, the suitable tool material and coating material are determined. To improve the cutting efficiency, use orthogonal test method to reduce the cutting force,

7、optimize the process parameters of the small diameter helical milling cutter, and then analyze the cutting performance of the cutting force, machining quality and machining accuracy. Finally, by studying the deformation

8、law of the cutting force and the coupling relationship between cutting force and the deformation, a flexible forecasting model of cutting force is established. The error compensation model is established by using the mir

9、ror image symmetry principle. The experimental results show that the error compensation model can effectively improve the accuracy of the system. In this paper, the development of the small diameter helical milling cutte

10、r, cutting parameters optimization and error compensation of the aperture is studied, which provides technical support and theoretical reference for the machining small diameter holes in aircraft assembly process. Key wo