高層建筑組成外文翻譯

1、<p>　　本科生畢業設計（論文）</p><p><b>　　外文資料翻譯</b></p><p>　　文獻出處 Civil engineering magazine </p><p>　　姓　　名　　　 游明堅 　 　 </p><p>　　學　　號　　 40810503

2、0220　　　</p><p>　　學 　院　　　 工程學院　　　 </p><p>　　?！　I(yè)　　　 土木工程　　　 </p><p>　　指導教師　 曹秀玲 　</p><p>　　2012年 5月8日</p><p>　　Components of Tall Buildi

3、ngs</p><p><b>　　Abstract </b></p><p>　　Materials and structural forms are combined to make up the various parts of a building, including the load-carrying frame, skin, floors, and p

4、artitions. The building also has mechanical and electrical systems, such as elevators, heating and cooling systems, and lighting systems. The superstructure is that part of a building above ground, and the substructure

5、and foundation is that part of a building below ground. </p><p>　　The skyscraper owes its existence to two developments of the 19th century: steel skeleton construction and the passenger elevator. Steel as

6、a construction material dates from the introduction of the Bessemer converter in 1885.Gustave Eiffel (1832-1932) introduced steel construction in France. His designs for the Galerie des Machines and the Tower for the Par

7、is Exposition of 1889 expressed the lightness of the steel framework. The Eiffel Tower, 984 feet (300 meters) high, was the tallest struct</p><p>　　Elisha Otis installed the first elevator in a department s

8、tore in New York in 1857.In 1889, Eiffel installed the first elevators on a grand scale in the Eiffel Tower, whose hydraulic elevators could transport 2,350 passengers to the summit every hour.</p><p>　　Load

9、-Carrying Frame </p><p>　　Until the late 19th century, the exterior walls of a building were used as bearing walls to support the floors. This construction is essentially a post and lintel type, and it

10、 is still used in frame construction for houses. Bearing-wall construction limited the height of building because of the enormous wall thickness required；for instance, the 16-story Monadnock Building built in the 1880’

11、s in Chicago had walls 5 feet (1.5 meters) thick at the lower floors. In 1883, William Le Baron Jen</p><p>　　All tall buildings were built with a skeleton of steel until World War Ⅱ. After the war, the short

12、age of steel and the improved quality of concrete led to tall building being built of reinforced concrete. Marina Tower (1962) in Chicago is the tallest concrete building in the United States； its height—588 feet (179 me

13、ters)—is exceeded by the 650-foot (198-meter) Post Office Tower in London and by other towers. </p><p>　　A change in attitude about skyscraper construction has brought a return to the use of the bearing wal

14、l. In New York City, the Columbia Broadcasting System Building, designed by Eero Saarinen in 1962,has a perimeter wall consisting of 5-foot (1.5meter) wide concrete columns spaced 10 feet (3 meters) from column center to

15、 center. This perimeter wall, in effect, constitutes a bearing wall. One reason for this trend is that stiffness against the action of wind can be economically obtained by using t</p><p><b>　　3. Skin &

16、lt;/b></p><p>　　The skin of a building consists of both transparent elements (windows) and opaque elements (walls). Windows are traditionally glass, although plastics are being used,especially in schools

17、where breakage creates a maintenance problem. The wall elements, which are used to cover the structure and are supported by it, are built of a variety of materials: brick, precast concrete, stone, opaque glass, plastics,

18、 steel, and aluminum. Wood is used mainly in house construction； it is not generally used fo</p><p>　　4. Floors </p><p>　　The construction of the floors in a building depends on the basic struct

19、ural frame that is used. In steel skeleton construction, floors are either slabs of concrete resting on steel beams or a deck consisting of corrugated steel with a concrete topping. In concrete construction, the floors a

20、re either slabs of concrete on concrete beams or a series of closely spaced concrete beams (ribs) in two directions topped with a thin concrete slab, giving the appearance of a waffle on its underside. The ki</p>

21、<p>　　5. Mechanical and Electrical Systems</p><p>　　A modern building not only contains the space for which it is intended (office, classroom, apartment) but also contains ancillary space for mechanical

22、 and electrical systems that help to provide a comfortable environment. These ancillary spaces in a skyscraper office building may constitute 25% of the total building area. The importance of heating, ventilating, electr

23、ical, and plumbing systems in an office building is shown by the fact that 40% of the construction budget is allocated to them. Be</p><p>　　There have been attempts to incorporate the mechanical and electric

24、al systems into the architecture of building by frankly expressing them； for example, the American Republic Insurance Company Building(1965) in Des Moines, Iowa, exposes both the ducts and the floor structure in an organ

25、ized and elegant pattern and dispenses with the suspended ceiling. This type of approach makes it possible to reduce the cost of the building and permits innovations, such as in the span of the structure.</p><

26、p>　　6. Soils and Foundations </p><p>　　All building are supported on the ground, and therefore the nature of the soil becomes an extremely important consideration in the design of any building. The design

27、 of a foundation depends on many soil factors, such as type of soil, soil stratification, thickness of soil lavers and their compaction, and groundwater conditions. Soils rarely have a single composition； they generally

28、are mixtures in layers of varying thickness. For evaluation, soils are graded according to particle size, which inc</p><p>　　Due to both the compaction and flow effects, buildings tend settle. Uneven settlem

29、ents, exemplified by the leaning towers in Pisa and Bologna, can have damaging effects—the building may lean, walls and partitions may crack, windows and doors may become inoperative, and, in the extreme, a building may

30、collapse. Uniform settlements are not so serious, although extreme conditions, such as those in Mexico City, can have serious consequences. Over the past 100 years, a change in the groundwater level</p><p>　

31、　The great variability of soils has led to a variety of solutions to the foundation problem. Where 4 firm soil exists close to the surface, the simplest solution is to rest columns on a small slab of concrete(spread fo

32、oting). Where the soil is softer, it is necessary to spread the column load over a greater area；in this case, a continuous slab of concrete(raft or mat) under the whole building is used.In cases where the soil near the s

33、urface is unable to support the weight of the building, piles</p><p>　　The construction of a building proceeds naturally from the foundation up to the superstructure. The design process, however, proceeds fr

34、om the roof down to the foundation (in the direction of gravity). In the past, the foundation was not subject to systematic investigation. A scientific approach to the design of foundations has been developed in the 20th

35、 century. Karl Terzaghi of the United States pioneered studies that made it possible to make accurate predictions of the behavior of foundation</p><p>　　Although there have been many advancements in buildin

36、g construction technology in general, spectacular achievements have been made in the design and construction of ultrahigh-rise buildings. </p><p>　　The early development of high-rise buildings began with str

37、uctural steel framing. Reinforced concrete and stressed-skin tube systems have since been economically and competitively used in a number of structures for both residential and commercial purposes. The high-rise building

38、s ranging from 50 to 110 stories that are being built all over the United States are the result of innovations and development of new structural systems. </p><p>　　Greater height entails increased column and

39、 beam sizes to make buildings more rigid so that under wind load they will not sway beyond an acceptable limit. Excessive lateral sway may cause serious recurring damage to partitions, ceilings, and other architectural d

40、etails. In addition, excessive sway may cause discomfort to the occupants of the building because of their perception of such motion. Structural systems of reinforced concrete, as well as steel, take full advantage of th

41、e inherent potent</p><p>　　In a steel structure, for example, the economy can be defined in terms of the total average quantity of steel per square foot of floor area of the building. Curve A in Fig.1 repres

42、ents the average unit weight of a conventional frame with increasing numbers of stories. Curve B represents the average steel weight if the frame is protected from all lateral loads. The gap between the upper boundary an

43、d the lower boundary represents the premium for all lateral loads. The gap between the upper boundar</p><p>　　7. Tube in tube</p><p>　　Another system in reinforced concrete for office buildings

44、combines the traditional shear wall construction with an exterior framed tube. The system consists of an outer framed tube of very closely spaced columns and an interior rigid shear wall tube enclosing the central servic

45、e area. The system (Fig.2), known as the tube-in-tube system, made it possible to design the world’s present tallest (714 ft or 218 m) lightweight concrete building (the 52-story One Shell Plaza Building in Houston) for

46、t</p><p>　　Systems combining both concrete and steel have also been developed, an example of which is the composite system developed by Skidmore, Owings & Merrill in which an exterior closely spaced fram

47、ed tube in concrete envelops an interior steel framing, thereby combining the advantages of both reinforced concrete and structural steel systems. The story One Shell Square Building in New Orleans is based on this syste

48、m. </p><p><b>　　高層建筑組成</b></p><p><b>　　1摘要</b></p><p>　　材料和結構形式結合在一起，成為建筑物的各個部分，包括的承載框架，外圍結構，地板和分區。大樓還設有電梯，加熱和冷卻系統，如機械和電氣系統，照明系統。上層結構是地面以上建筑物部分，下部結構地基和基礎，是低

49、于地面建筑的一部分。</p><p>　　摩天大樓之所以會存在，得益于19世紀的兩個發展：鋼骨架建設和乘客電梯。鋼材作為建筑材料是從貝西法在1885被發明開始。艾菲爾在法國第一次介紹了建筑鋼材。他設計了1889年巴黎世界博覽會塔鋼框架很出色。艾菲爾鐵塔，高984英尺（300米），是由人建成的最高結構，一直沒有被超越，直到40年后的一系列美國摩天大樓。</p><p>　　1889年沙奧的斯

50、為在紐約的百貨公司安裝了第一部電梯。巴黎的鐵塔每隔一小時可以運送2350名乘客，艾菲爾鐵塔安裝了一個規模宏大的電梯，是有史以來的第一次。</p><p><b>　　2 承重框架 </b></p><p>　　直到19世紀末，建筑物的外墻一直被用作承重墻支持地板。這種結構基本上是后門楣類型的，它仍然用于住房建設的框架。軸承墻施工因建設需要巨大的墻壁厚度和高度而限制，例

51、如，建于1880年芝加哥的16層高莫納德諾克大廈，在較低樓層墻體高度已達5英尺（1.5米）厚。 1883年，威廉樂男爵（1832至1907年）支持鑄鐵列的鐵柱來支撐樓層?？蚣芙Y(jié)構由骨架建設，鋼梁和柱組成，于1889年首次使用。作為骨架建設的成果，圍墻成為“玻璃幕墻”，而不是其他服務配套。砌體，直到1930年才用輕金屬和玻璃幕墻的使用。引入鋼材料后，建筑物的高度迅速增加。</p><p>　　所有的高層都

52、是由鋼骨架建筑的，直到二戰為止。戰爭結束后，鋼和混凝土質量的提高，促使高層鋼筋混凝土建筑的建造。濱海大廈（1962）在芝加哥是美國最高的混凝土建筑，其高度是588英尺（179米），超過在倫敦的辦公室大樓及其他塔。</p><p>　　有關摩天大樓的承重墻的使用在態度上有了改變。在紐約市，埃羅·沙里寧設計于1962年的美國哥倫比亞廣播大樓，圍墻由5英尺（1.5米）范圍內的混凝土柱組成，柱間距10英尺（3米

53、）。實際上，這圍墻構成承重墻。造成這種趨勢的原因之一是建筑物的墻像一個管道可以有效地抵抗風的作用；世貿大樓是另一個管道法的很好例子。相比之下，堅固的框架或垂直支撐通常提供建筑的橫向穩定。</p><p><b>　　3 圍護結構</b></p><p>　　建筑物的圍護結構由透明的窗戶和不透明的墻組成。 窗戶是傳統的玻璃，雖然塑料也被使用，尤其是在學校，破損

54、的嚴重的地方。墻上的材料的作用，是用來掩蓋結構和它支持的，材料有磚，預制混凝土，石材，不透明的玻璃，塑料，鋼材，鋁。木材主要用于房屋建筑;它一般不用于商業，工業和公共建筑等有火災隱患的地方。 </p><p><b>　　4 樓地面 </b></p><p>　　建筑物的樓層的建設，取決于所使用的基本結構框架。鋼骨架建設中，地板是在鋼梁或波紋鋼組成的一個具體的平頂甲板

55、上的混凝土或者磚?；炷潦┕ぶ?，地板上混凝土梁或一系列密集的鋼筋混凝土梁在兩個方向（排骨）的混凝土或者磚配上薄混凝土板上，下面抹一層抹面。樓層種類取決于支撐柱之間的距離或墻和空間的功能性。例如，在一座公寓樓，墻壁和列間距在12至18英尺（3.7米至5.5米）之間，最流行的是建設一個堅實的無梁混凝土板。樓板底面作為它下面的空間上限。辦公大樓中使用波紋鋼地板，因?yàn)椴y鋼地板波紋由另一塊金屬板蓋上時，可以形成電話線和電線管道。</p&g

56、t;<p><b>　　5 機械電力系統</b></p><p>　　如今的建筑不僅要包含必要的使用空間，也要包括機械、電力系統等的輔助空間，來營造一個舒適的生活環境。這些輔助的空間可能占大樓總建筑面積的25%。一個辦公大樓中供暖、通風、電力和衛生設備系統預算額在實際建筑總預算額中的40%，說明了它們在建筑中的重要性。許多建筑是密閉的，窗戶不能被打開，所以由機械系統要提供通風設

57、備和空氣調節的設備。新鮮的空氣從中央換氣室由空氣調節器輸入。通風管以及控制照明設備單元由懸掛在上面樓層結構下面的天花板遮住了。提供動力的電力線路和電話通訊線路也要在天花板里或也在樓地面結構層中管道或?qū)Ь€管里。</p><p>　　嘗試性地把機械、電力系統加入建筑物的建筑風格中去，讓他們裸露在結構的外面；比如美國保險公司大樓的管道和樓地面結構層有組織的、優美的懸掛在天花板上。這些類型的方法使建筑物的花費盡可能的減少

58、了，也使結構在結構間距方面有了創新。 </p><p><b>　　6土地和地基 </b></p><p>　　所有建筑都靠在地面上的土壤支持，因此土壤的性質，成為任何一個建筑物的設計非常重要的考慮因素?；A(chǔ)的設計取決于許多方面，分層土壤，土壤盆和他們的壓實厚度，地下水條件，土壤等因素。土壤中很少有一個是單一組成的，他們一般都是在不同厚度層的混合物。根據評估，土層

59、的等級根據土分子的大小來劃分，依次是淤泥、粘土、沙、石子和巖石。一般來說，較大分子的土支撐的荷載要大。最堅硬的巖石能夠支撐荷載是每平方米100噸，最軟的淤泥能夠支撐的荷載大約是每平方米0.25噸。所有地表以下的土都是處于受壓的狀態，這些土承受與作用在它上面的土柱重量相等的壓力。許多土有彈性的性質——他們被重載壓壞或卸載后又能恢復。土的彈性隨時間而改變，土層的變形在恒載作用下隨時間的增長不斷地改變。一段時間后，假如加于土層上的荷載大于土自

60、然壓緊狀態下的重量，那么建筑物不會產生沉降。建筑物的重量可能會使土產生流動，經常會發生土被擠出。</p><p>　　由于壓實和流量的影響，建筑物往往會沉降。不均勻的沉降例如比薩斜塔，結果會使建筑物傾斜，墻和隔墻也可能會出現裂縫，窗戶和門會變形，甚至建筑會倒塌。均勻沉降不會這么的嚴重，但也可能出現危險狀況，比如墨西哥的一些建筑，出現各種各樣的結果，過去一年里，地下水位發生了變化，使一些建筑下沉了3米。類似的情況可

61、能發生在建造時也可能是建造后，所以小心的處理建筑物下的土層是非常重要的。</p><p>　　土壤變化很大，所以出現了各種解決的方案。 堅定土壤的表面，最簡單的辦法是的用混凝土基礎。如果土壤是軟的，這樣的話整個建筑就可采用筏板基礎。假如表面土層不能夠支撐建筑物的重量，木結構建筑、鋼結構建筑、或者混凝土建筑應該建造在堅硬土層上。 </p><p>　　建設一幢建筑物一般是從基礎開始

62、，然后到上部結構。但是設計的過程卻是從屋頂開始到基礎。過去地基的處理不是一個系統的研究項目。到20世紀，科學的地基設計方法，已經發展起來了。美國的Karl Teraghi不斷進行創造和研究，使土力學和土地勘測聯合起來，使盡可能的準確預測地基的活動狀態。過去一個典型的地基破壞的例子是比薩斜塔，現在變得幾乎不存在了。地基仍然是建筑物中不可見的部分中費用最大的。 </p><p>　　雖然在建筑物的建造工藝上取得很多的

63、進步，但在超高層建筑物的設計跟建造上，依然取得了驚人的成績。 </p><p>　　最早的高層建筑的發展是從鋼結構開始的。鋼筋混凝土和薄殼筒體體系成為了許多住宅和商業建筑以節儉和竟?fàn)帪槟康牡慕Y(jié)構。作為新結構體系創新和發展的原地，美國到處都是50到110層的高層建筑。 </p><p>　　巨大的高度使得柱和梁的尺寸越來越大，才能使建筑物更加堅固，才能在風荷載作用下其傾斜度超過限值。過多次地

64、側向擺動可能會引起隔墻天花板和其它建筑部件損壞。除此之外，過大的擺動也可能會給建筑物中的居住者帶來不安和恐懼，因?yàn)闀顾麄冇幸苿拥母杏X。鋼筋混凝土結構體系跟鋼結構一樣，內在的潛力使得建筑物非常堅硬，所以不需要附加的強化擺動限制。 </p><p>　　一個鋼結構中，比如，根據建筑物每平方米的樓層面積的總平均用量來表示它的經濟性。表示一般的框架在沒有水平荷載的作用下鋼的平均重量。上邊界和下邊界之間的間距表示一般的梁

65、—柱框架重量。結構工程師以發展結構體系為目標。 </p><p><b>　　7框筒結構</b></p><p>　　辦公樓鋼筋混凝土中的另一個系統結合了傳統的剪力墻結構，框筒與外部。該系統由列間隔很近，室內是剛性剪力墻管封閉的中央服務區外的框筒，被稱為筒中筒系統，使用這種體系建造設計的建筑物是目前世界上最高的輕質混凝土大樓，僅有35層的傳統簡力墻結構。</p&