軟性印刷電路板簡介

1、軟性印刷電路板簡介IntroductiontoFLEXIBLEPRINTEDCIRCUIT目錄1.軟板簡介.................................12.基本材料.................................13.常用單位.................................24.軟板製程.................................24.1.一般流程.....

2、........................24.2.鑽孔.................................34.3.黑孔鍍銅............................44.4.壓膜曝光............................64.5.顯影蝕刻剝膜.......................84.6.微蝕.................................84.7.CVL

3、假接著壓合.......................94.8.沖孔.................................94.9.鍍錫鉛...............................94.10.....................................水平噴錫94.11.....................................印刷104.12.................

4、....................沖型104.13.....................................電測101.軟板(FLEXIBLEPRINTEDCIRCUIT)簡介以俱撓性之基材製成之印刷電路板具有體積小重量輕可做3D立體膠一般有Acrylic膠及Expoxy膠兩種最常使用Expoxy膠厚度上由0.4~1mil均有一般使用1mil膠厚2.2.覆蓋膜Coverlay覆蓋膜由基材膠組合而成其基材亦區分為PI

5、與PET兩種視銅箔基材之材質選用搭配之覆蓋膜覆蓋膜之膠亦與銅箔基材之膠相同厚度則由0.5~1.4mil2.3.補強材料Stiffener軟板上局部區域?yàn)榱撕附恿慵蛟黾友a(bǔ)強以便安裝而另外壓合上去之硬質材料2.3.1.補強膠片區分為PI及PET兩種材質4.2.鑽孔NCDrilling雙面板為使上下線路導通以鍍通孔方式先鑽孔以利後續鍍銅4.2.1.鑽孔程式編碼銅箔基材鑽孔程式B40NNNRR400(300)銅箔基材品料號末三碼版別程式格式(